Categories

Contact Us

Shanghai Pacific Pump Manufacture (Group) Co.,Ltd

Address: No.25 Lane 7488, Hutai Road, Shanghai, China

Tel: +86-21-5653 1900

M/P: +86-135 0189 6165

E-mail: info@pacificpumpgroup.com

Horizontal MULtistage Centrifugal Pump

Horizontal MULtistage Centrifugal Pump

Horizontal Multistage Centrifugal Pump Application: 1. Daily and fire water supply for high-rise 2. Water supply and discharge in mines 3. Cyclic pressurization, air-conditioning system. Type D\DY\DF\DM multistage Pump is single-suction, multi-stage, segmental centrifugal pump. Type D It is provided for delivering clear water without solid particles or other liquid which is physically and chemically similar to clear water.

Chat Now

Product Details

Horizontal Multistage Centrifugal Pump Basic Info

Model   NO.: D

Impeller   Number: Multistage Pump

Working   Pressure: High Pressure Pump

Influent Type of   Impeller: Single Suction Pump

Position of   Pump Shaft: Horizontal Pump

Pump Casing Combined:   Horizontal Split Pumps

Mounting   Height: Since Irrigation Centrifugal Pumps

Impeller: Closed

Usage: Pump

DIN Standard: Big   Capacity and High Pressure

Trademark:   Pacific Pump

Specification: DIN,   ISO

Origin:   Shanghai

HS Code: 8413709990


Centrifugal Pump Description

Technical Parameter: 50Hz and 60Hz

Capacity: 6 - 500 m3/h

Lift Head: 33 - 960m

Drive Power: 2.2 - 1000kw

Rotary Speed: 1480rpm. 2950rpm at 50Hz

1780rpm, 3540rpm at 60Hz

Calibre: 50 - 200mm

Temperature range: -15ºC - +80ºC

Horizontal Multistage Centrifugal Pump Application:

1. Daily and fire water supply for high-rise

2. Water supply and discharge in mines

3. Cyclic pressurization, air-conditioning system.

Type D\DY\DF\DM multistage Pump is single-suction, multi-stage, segmental centrifugal pump. Type D It is provided for delivering clear water without solid particles or other liquid which is physically and chemically similar to clear water.

The temperature of the liquid is -20ºC~ 80ºC...Type DY is used to transfer non-corrosive oil and oil products without solid particles and with viscosity less than 120 centistokes. The temperature of the liquid is -20ºC~ 150ºC Type DF is used to transfer corrosive liquid without solid particles, The temperature of the liquid is --20~+150ºC. Type DM is used to transfer clear water or liquid which is physically and chemically similar to clear water with limited solid particles

Construction:

Type D\DY\DF\DM pumps are horizontally installation. The direction of inlet and outlet of Type DY\DF is vertical upward except type D pump with horizontal inlet. Type DYI\II\IIIDF can be also with horizontal inlet and outlet.

The axial thrust gets balanced with the help of balance disk. Type D, DY, DF3_40 pumps get the balanced with the help of

Symmetrically construction

The shaft seal usually uses packing seal, according to customers' requirements, mechanical seal is used, too. Type DF85_67pumps use sliding bearings which get lubricated with dilute--oil.

The others use rolling bearings which get lubricated with grease except type DF85-67 pump with dilute oil.

Materials of tolerance parts: Type D pump are made of cast iron, the shaft is 45# steel.

Type DY: The materials are divided into three types: I - cast iron(the temperature in operation is 20--150ºC)

II_cast steel (the temperature in operation is 45--400ºC)

III_stainless steel (the temperature in operation is 45--400ºC)

Type DF: According to the liquid can be divided into cast steel and stainless steel.

Type DM: Anti-friction cast iron

Description of pump type:

For example D(DY\DF, DM)I\II\III\85--67x8

D-- multistage centrifugal Pump

D-- multistage centrifugal Pump for boiler feed

DY_multistage oil pump

DF-- multistage anti-corrosive pump

DM-- multistage anti-friction pump

I\II\III_code of materials

85capacity(m3/h)

67head of each stage

8number of stage, total head is 67x8=536(m)


Hot Tags: horizontal multistage centrifugal pump, manufacturers, suppliers, factory, brands
Related Products

Inquiry