Single Stage Horizontal End Suction Back PULl Out Centrifugal Pump
IS & IH Type Centrifugal Pump is a horizontal single-stage single suction (axial suction) cantilever centrifugal pump.
IS & IH Type Horizontal Single Stage Back Pull Out End Suction Centrifugal Pump
IS & IH Type Centrifugal Pump is a horizontal single-stage single suction (axial suction) cantilever centrifugal pump. IS pump is suitable for pumping water and liquid similar to the water below 80℃ without solid particles. IH Pump is suitable for conveying corrosive liquids (-20℃～+120℃) that have similar viscosity to water and do not contain solid particles.
Performance : (50HZ & 60HZ)
Flow:up to 1200m3/h
Head:up to 180m
Speed:up to 3600rpm
Temp.:up to 120Deg C
Diameter :up to 400mm
Pressure:up to 25bar
Horizontal End Suction Centrifugal Pump Construction:
Design Standard:GB , DIN24255
Flange Standard:GB , DIN2501 , ISO7005.2
Impeller Type: Closed,Semi-open,Open,Vortex
Seal Type: Mechanical Seal or Gland Packing
1. Its performance and dimensions meet European Standard BS EN733/DIN24255
2. Back-pull-out design, without having to disturb pump body and pipelines when servicing.
3. All the models only use 3 kinds of pump shafts and bearing cover, make parts exchangeable.
4. Impeller is optimized designed, inlet is enlarged, no whirlpool, deduct the water pump NPSH efficiently, which makes pump work stable with little noise.
5. Casing and casing cover use wearing neck ring structure, which makes pump easy to maintain, makes parts work longer. The replaceable seal ring, makes pump work efficiently in a long time
Pump Construction :
1. Non-self-priming, single stage, single suction, horizontal, axial suction and radical discharge, pump body is fixed by base.
2. Use bearing cradle, which can orientate bearing, prevent from radical vibration, improve the rigidity of rotary part.
3. Compacted shaft, use deep grove grease lubricated roller bearing
4. Connect pump and motor with semi-flexible coupling
5. Use standard wearable mechanical seal.
6. TEFC motor, its size complies to IEC standard, installation type B3.
- Previous: High Pressure Boiler Feed Centrifugal Water Pump
- Next: Double Entry Volute Casing Centrifugal Pump